Netgear router is a great device to opt for today. Those users think that their life is only internet and they can’t live even a single second without it can access the Netgear router login page via 192.168.1.1 router login IP and configure it. But, configuring the router is just the first step towards high speed internet. To take the performance of the router to the next level and enjoy the boosted internet speed (up to 30 percent), you need to update its firmware.
But, most of the users who have tried to perform the Netgear router firmware update process have failed. If you are among those users who are facing issues while updating the router’s firmware can go through this article.
Here, we have penned down the reasons causing the issue along with the fixes to troubleshoot it. Let’s get started!
Causes: Can’t Update the Router’s Firmware
Prior to making you familiar with the fixes to troubleshoot the issue, we will provide you the causes behind it. Why? Look, if you have the actual reason handy, it might be a piece of cake for you to resolve the issue. Keep scrolling down!
The first reason: Your internet modem and the router are place at a distance.
The second reason: You don’t have steady WiFi connectivity or your internet plan got expired.
The third reason: Your client device is not connected to your router.
The fourth reason: You have not followed the firmware update instructions correctly.
The fifth reason: Maybe you have not downloaded the firmware file as per the model you have.
The sixth reason: You have interrupted the process.
The seventh reason: Your Netgear router is tired of working for too long. Keep in mind: continuous use of the router can impact its performance and internet usage, which can make it work slow.
The eighth reason: The device on which you are trying to download and upload the firmware version doesn’t have enough space.
That’s it! These were some of the topmost reasons causing the “can’t update Netgear router firmware” issue. Now, dig a little deeper and know how to get the issue fixed.
Fixed: Can’t Update the Router’s Firmware
The first fix: Your router and the internet modem must be kept closer and connected firmly.
The second fix: Run an internet speed test. Confirm from your ISP if your WiFi is working or isn’t down because for maintenance.
Note: The firmware update process depends on your internet. If you have fast and good internet services, you will hardly have issues while updating the router’s firmware.
The third fix: Considering the Netgear router’s model you have, try to commence the firmware update process again and follow the instructions very carefully without skipping any step.
The fourth fix: Whatever the situation is, do not – kindly do not interrupt the process. Means, avoid going online, turning off your router, or disconnecting it from your modem, and your client device.
The fifth fix: To get firmware update success, your computer/ laptop must be connected to your router.
The sixth fix: Make some space on your client device. Maybe it is filled with large Medias or documents, and there is no space left for the firmware file to download. Once you are done doing this, restart your client device, and try downloading the file again.
What happened? All your stuff is important and you cannot get rid of them? Don’t worry! Get rid of unnecessary ones. And, if all of them are necessary, kindly upgrade your device’s RAM from 4GB to 8GB, or 8Gb to 16GB.
The seventh fix: If none of the above-mentioned fixes help you update Netgear router’s firmware, then restart it along with your modem and your client device. Once you are done, access the router’s firmware update page using 192.168.1.1 admin IP, and follow the instructions.
To Conclude
We are now going to wrap up our article. We actually hope that after walking through the reasons and applying the fixes provided here, you will be able to troubleshoot “can’t update Netgear router firmware” issue.
