Although every Netgear WiFi range extender runs on the default IP address 192.168.1.250 and is manageable via the same, still it gets a new IP from the router every time it is powered up. But, in all these scenarios, there are chances of getting the Netgear extender IP address conflict error that is not resolved on time and can prevent access to the www mywifiext login URL. Just in case you have already become a victim of the same issue, refer to the tips rounded up in this write-up. Keep reading.
Basic Solutions: Netgear Extender IP Conflict
The troubleshooting section has been divided into two halves for your convenience. The first half will shed light on the basic techniques that can help you resolve the IP conflict error. On the other hand, the second half constitutes the hacks that are of an advanced level and might require accessing the administration panel of the range extender.
-
Reboot the Extender
The first basic technique that can be embraced to get rid of the Netgear extender IP address conflict error is the rebooting process. By doing so, you will be able to assign a new IP address to the extender. The process of rebooting does not require you to get hold of a Ph.D. degree. You just need to push the Power button of the extender, let it rest for 15 minutes, and then power it up once again.
-
Strengthen the LAN Connection
It is the router that assigns the IP address to the range extender when it is powered up. It means the router also acts as a source of internet for the extender. This is also an indication that the LAN connection between both devices determines the status of the IP allocation process. Thus, you need to pay some attention to the Ethernet cable joining both devices. If the cable is found damaged at any point, replace it immediately with a new one.
-
Check IP Address of Other Devices
One out of the multiple reasons behind the IP conflict error is the allocation of the same IP address to two or more networking devices. Therefore, you are suggested to access the dashboard of your WiFi router and verify if it has assigned the same IP to multiple devices or not. If yes, then re-establish a connection between those devices and the router’s WiFi network. Is the IP conflict resolved now? No? Move to the section disclosing the advanced troubleshooting tips.
Advanced Fixes: Netgear Extender IP Address Conflict
-
Try to Update the Firmware
First of all, check whether you are able to access the Netgear Genie smart setup portal or not. If yes, then it is time to install a new firmware version on the extender. This is because the firmware is responsible for controlling all the activities carried out with the aid of the range extender. Therefore, chances are that your extender is stuck in a reboot loop due to which new IPs are getting assigned and hence the IP conflict error showed up. But, be sure that you do not upload the incorrect firmware version on your wireless range extender. Else, the problem might arise instead of getting fixed.
-
Examine Power and Internet-Related Issues
Now, you need to do yourself some favor and check if the wall socket into which you have plugged your WiFi range extender is working or not. Hundred to one-shots, if its condition is not meeting our expectations, then you can unplug your range extender and connect it to a working wall socket. Talk to your Internet Service Provider to verify if there are Internet-related issues from the backend. If he agrees to what we are assuming, then give him some time to get the internet issue fixed.
The Conclusion
Getting the Netgear extender IP address conflict error is a common thing that can be easily resolved with the help of easy-to-implement troubleshooting techniques. Now, we hope that you will be able to make the most out of your range extender after taking the aid of the above-given tips.
